Endless Looping / Repeated triggering when Nikon camera set to CL or CH release modes

We tested as good as we can. But there will always be things we didn't find. If you found things that apparently don't work as they should, you can report them here so we can take care of them as soon as possible.
Post Reply
FlatWorm
Posts: 1
Joined: June 3rd, 2022, 2:56 pm

June 3rd, 2022, 3:08 pm

Hi,

Set Nikon camera in CL or CH release mode, attach a flash, use the Android App, press ONCE on the button to trigger camera ONCE.
Result: endless looping of taking pictures by the Unleashed/Camera. Not possible to stop. Even when camera turned OFF and ON again. Unleashed keeps looping and triggering the camera. Only thing that works is pull out the battery of the camera to make it stop. Camera and Flash go berserk!!!

Could this be fixed ASAP? It is annoying because now I can't use the CL and/or CH release modes in the Nikon-specified way. So, I can't use the Android App to remotely trigger the camera. Have to return to a wired set up (again). Back to the old days, which is not preferable.

TIA!

FlatWorm

[edit: typo]
Natasha
Posts: 13
Joined: November 18th, 2020, 9:18 am

June 6th, 2022, 6:07 pm

Sorry for the trouble! Which camera are you using? And which firmware version are you on? To find that information:
App menu → Unleashed icon in bottom left → tap on your Unleashed → tap "Firmware"
Marketing/Communications/Operations at Foolography
Post Reply