Unleashed + Syrp Motion Controller Move-Shoot-Move Functionality

We tested as good as we can. But there will always be things we didn't find. If you found things that apparently don't work as they should, you can report them here so we can take care of them as soon as possible.
Post Reply
alexpnyy
Posts: 3
Joined: March 20th, 2024, 4:29 pm

March 20th, 2024, 4:43 pm

Hi All,

New Unleashed '22 owner and it's a great tool. I have successfully setup a motion control timelapse with the Unleashed and Syrp Genie Mini II (connected to the Unleashed app after being configured in the Syrp app). One thing I noticed, is that when it is time to take a new image capture the motion controller moves the same time as the exposure starts. For longer exposure shots, this is introducing motion blur into the final image. The Syrp app has a "move-shoot" delay (default is .4s) so that the exposure starts after the motion controller has moved. I am unsure if this information is not being passed along to the Unleashed or if it is, but just not working. Any help would be greatly appreciated!


Equipment:
Sony A7IV
Unleashed M '22 - App Version (3.1.1)
Syrp Genie Mini II (Pan) - App Version (2.2.0)
iPhone 14 Pro Max (17.3.1)

Can provide the Genie, camera, and Unleashed FW later, currently at work.
alexpnyy
Posts: 3
Joined: March 20th, 2024, 4:29 pm

March 21st, 2024, 4:15 pm

Unleashed M FW:
A 3.3.0
B 3.3.1
C 3.3.1

Syrp Genie Mini II V2.8
alexpnyy
Posts: 3
Joined: March 20th, 2024, 4:29 pm

June 4th, 2024, 9:41 pm

Hello, just following up!
Post Reply