Long Exp and Timelapse

We tested as good as we can. But there will always be things we didn't find. If you found things that apparently don't work as they should, you can report them here so we can take care of them as soon as possible.
Post Reply
moonlighting
Posts: 3
Joined: June 28th, 2020, 11:37 am

June 28th, 2020, 11:51 am

Hi,
for taking pictures at night I thought I try "unleashed".
Got it a few days ago, but well I might not be compatible with it.

I have a Canon 750Da and what I did was:
- Under Photo:
- BULB
- Long EXP: 25s or 1.1m or...
- under Timeplapse
- Intervall: a few seconds higher than the Long EXP time
- Duration: e.g. 5min

what happens:
- one picture taken with less than 1s exp and the entry on the top changes to 1s. Next picture it changes to 1/1000s.

also mot of the time I have BULB and a time under long EXP it changes to "TV" and block sign under s and Long EXP is greyed out.
Error message: long EXP duration is not avaiböabe. Mode or shutter speed is not set to M and BULB" well on the Camera display it still is, but not inside the App:(

What am I doing wrong?

Michael

P.s. Canon EOS 750Da, iOS 13.6, Unleashed 1.3.6 (1006)
Attachments
IMG_1358.jpg
IMG_1358.jpg (14.67 KiB) Viewed 4508 times
moonlighting
Posts: 3
Joined: June 28th, 2020, 11:37 am

June 28th, 2020, 12:03 pm

even when I choose bulb and hold down the button it works one time, changes to a different time or TV with cross.
If I go to BULB and then LOng Exp 5s and push the button I get a really short shot, less than 1s and the TV entry instead of BULB.
Sometime it changes to 1/640 or to 1s or to 1/1000s and long EXP is grey.

Stil the display on the camera is set to BULB and never changes at all

Michael
Oliver
Posts: 1139
Joined: October 9th, 2018, 4:17 pm

June 30th, 2020, 12:28 pm

Hi Michael,

that sounds like a bug! thanks for the report.
I've created a ticket for our developers, so we'll have another closer look.
Founder & CEO of Foolography, Hardware & Firmware developer.
moonlighting
Posts: 3
Joined: June 28th, 2020, 11:37 am

June 30th, 2020, 4:32 pm

thx

Michael
Post Reply